Introduce

Adhesive sealing concrete BS 8620S – 600ml

Description

A single component, high-performance sealant based on advanced MS Polymer Technology. It is solvent,
silicone and Isocyanates free. It has excellent UV, weather and temperature resistance. It has excellent adhesion
over a wide variety of substrates and is paintable with most types of common industrial paints.

Properties

1. ASTM C-920 compliant
2. 50% movement capability
3. Paintable
4. Less dirt streaking
5. Good UV resistance
6. Solvent, Silicone & Isocyanates free
7. Primerless bonding to most surfaces
8. No air bubbling
9. Works on wet/damp substrates

Fields of application

Ideal for connection and expansion joints in building.It is goodfor glazing systems especially when painting is
required. It features less streaking hence ideal for bonding and sealing at aluminium composite panel. It may be
used without primer, to seal assemblies of concrete, glazed surfaces, porcelain, coated metal, epoxy and
polyester panels, polystyrene, uPVC, stainless steel, anodized aluminum and finish wood.

PACKAGING & STORAGE:

600ml / bar
Store in a dry and cool place with temperature below +25°C.
From the date of production, 9 months in HDPE cartridge; and 12 months in aluminium foil sausage.

THÔNG SỐ KỸ THUẬT

Curing System Moisture Curing
Density 1.55 g/mL (White & Grey colour)
1.52 g/mL (Black colour)
Skin over time 35 – 60 minutes
Tensile at break (ASTM D412) 1.0 N/mm²
Elongation at break (ASTM D412) > 900%
Lap Shear Strength, Al to Al (ASTM D1002) 0.5 N/mm²
Shore A Hardness (ASTM C661) 25 – 35
VOC content < 4%
(California Air Resources Board Method 310)
Joint movement capability (ASTM C719) ±50%
Application Temperature 5°C to 40°C
Service Temperature -30°C to 100°C
Packaging 290ml (cartridge), 600ml (sausage)