Neotex® Metal Primer

Introduce

Fields of application

Neotex® Metal Primer is suitable for interior and exterior metal surfaces & exhibits very good adhesion, offering protection against corrosion.

Properties

Neotex® Metal Primer offers excellent anti-corrosive protection near the sea. It exhibits resistance to abrasion, as well as durability against adverse weather conditions and industrial atmosphere. It is recommended for application on metallic surfaces that will be covered with water-based coatings.

Technical Characteristics

Density                                                          1,29gr/cm3
pH                                                                  8,5-9
Coverage                                                       10-12m2/L per layer
Drying time (+25C)                                2-3 hours
Dry to recoat (+25C)                              4-6 hours
V.O.C. limit acc. to the E.U. Directive 2004/42/CE for this product of category AiWB “One-pack performance
coatings”: 140g/l (Limit 1.1.2010). V.O.C. content of the ready to use product <140g/l.

Instructions for use

Surface preparation: The surface of the metal should be clean, dry and free from dust, oil, grease, and any poorly adhering material. Any areas with rust should be sandblasted or scrubbed with a wire brush and cleaned thoroughly. The rust converter Neodur® Metalforce is proposed to be used locally on rusty surfaces. New metal surfaces should be degreased with solvent Neotex® 1021.