Procedure
Surface preparation
The surface must be free of dust, organic substances and oil. The surface must to be cleaned with a soft cloth (which must be changed frequently) with Neosil® Bond. Ιt is necessary to apply the material carefully on the entire surface without leaving untreated spots. 2 hours after drying, the subsequent coating system can be applied. The optimum adhesion results are obtained between 2 – 6 hours. Should more than 24 hours pass from the application, then the whole procedure must be repeated.
Cleaning of tools
Immediately after application with solvent Neotex® 1021
Storage stability
1 year if kept unopened in its original closed package, protected from frost and sunlight
Colour: Transparent
Packing: 1lt
