Bitumode Delta-P 3mm S waterproof membrane

Introduce

Bitumode Delta-P 3mm S waterproof membrane

DESCRIPTION :

Manufactured by Modern waterproofing company, BITUMODE is the highest quality polymer modified bitumen waterproof membrane. BITUMODE is modified by APP and APAO so it still guarantees high performance in a variety of conditions.

BITUMODE DELTA – P is reinforced with nonwoven polyester (P) yarn which offers high mechanical properties.

Product type

Standard thickness available includes 3mm and 4mm. Popular weights are 3kg / m2 and 4kg / m2.
The bottom surface is usually Polyethylene (PE) film.

The upper side includes the types:

Polyethylene (PE) film
Fine sand (S)
Gray Stone (GY)
Green stone (GRN)
White stone (WT)
Red stone (RD)

The types of stone surface are usually 4kg, 4.5kg and 5kg / m2.
The nominal length of each roll is 10m and the nominal width is 1m.
Special specifications can be adjusted according to customer needs

CHARACTERISTICS:

BITUMODE DELTA – P is designed with special care to provide customers with a complete and versatile product line.

Advantages of BITUMODE DELTA – P include:

Easy to apply (hot heat)
High mechanical properties
Absolute permeability coefficient for water pressure
Flexible at low temperatures down to -20C
Perfect high temperature performance
Excellent adhesion to any surface
High dimensional stability
Environmental friendliness

APPLICATION :

BITUMODE DELTA – P is a versatile waterproof membrane that can be used almost anywhere. Hot modified bitumen films subjected to mild to moderate mechanical stress are common and require performance at medium temperature. jar.

BITUMODE DELTA – P can be applied in:

Single-layer roofing system for common applications
Two-layer roof system combined with reinforced fiberglass BITUMODE DELTA – G.
Waterproofing toilets and wet areas inside buildings

BITUMODE DELTA – P with a mineral surface is recommended for open roof systems (without protection) for roofs with no traffic or only light traffic.

PACKAGING:

1m x 4mm x 10m / roll
BITUMODE membranes should be stored upright in a well-ventilated and sheltered place away from direct sunlight.

NOTE:

The above results are based on 4mm membrane
Tolerance of about 20% of the above results for the mechanical properties comply with the tolerance standard of (ASTM, EN).
Because the product is continuously improved, the Company reserves the right to change the above values ​​without prior notice.