PANDA SIMSELF ALUMINUM FOIL COATED MEMBRANES (SELF ADHESIVE)

Introduce

Description

SIMSELF Aluminum foil coated membranes are elastomeric type of membranes with SBS (Styrene – Butadiene – Styrene) thermoplastic resin, used to enhance of the bitumen. . These membranes are not negatively effected by sunlight due to its aluminum foil coating. After the removable film layer on one side is peeled,the membrane is ready to stick.

Fields of application

Since Simself aluminum foil coated membranes can adhere to various surfaces such as wood, plastic, glass, mortar, concrete and more, they can be used on roofs,walls, parapets, chimney flashings, eaves, copings, gable walls, cracks in roof covering tiles, ship deck waterproofing, automotive industry, etc. especially where torch fire is risky or unsuitable to use. Simself membrane can easily be applied on fine details. Its self-adhesive lower surface can easily be applied on heat insulation boards (XPS, EPS, etc.) and materials non resistant to heat such as plastic and wood. In addition, on curvilinear and skewed roofs, its use is very easy and it takes the form of the application surface

Properties
With its self adhesiveness, water tightness and resistance to structural movements, Simself Membranes bring practical solutions to many fine details. Thanks to its flexibility it is comfortably applied on curvilinear or skewed surfaces. Simself Membranes are produced in rolls of 1 meter width and 10 or 15 meters length. The membrane becomes ready to stick when the film layer is peeled. But to provide a good adhesion, the application surface should be dry and clean. On concrete surfaces, Standart bituminous primer should be applied prior to application and after the drying of the primer layer, SimSelf Membrane has to be sticked onto the already dry surface. Simself Membrane, which can be produced with mineral coating on one face, can be used as the uppermost layer material on covering.

Storage and Protection
Simself membranes should not be placed in overlapping manner preventing the heavy load on the rolls.
Membranes should be protected from freezing and sunlight (ultraviolet light).
They should be kept away from heating sources. They must be protected from sudden temperature changes.