Excellent impermeability to water, increased adhesion to any substrate, enhanced abrasion resistance.
Withstands contractions and expansions.
Increases flexural and tensile strength, durability against frost and exhibits high chemical resistance to light acids.
Fields of Application
Renderings (cement, sand, Revinex®, lime, water, fibreglass mesh Gavazzi®).
Proportion: 1-3kg Revinex®/cement bag 50kg.
Purpose: Creation of waterproof, durable and crack-resistant plasters.
Enrichment of the cementitious waterproofing mortar Neopress® (Neopress®, Revinex®, water).
Proportion: 3-5kg Revinex®/ Neopress® bucket 25kg.
Purposes: Waterproofing of basements, underground walls, swimming pools with increased resistance to positive and negative hydrostatic pressures.
Waterproof cement mortars & screeds (cement, sand, Revinex®, water).
Proportion: 3-10kg Revinex® / cement bag 50kg.
Purposes: Creation of slopes, levelling, grooves, joint-fillings, adhesion of tiles.
Concrete repair (sand, Revinex®, repairing mortar Neorep®).
Step 1: 1kg Revinex®/ 2-3kg cement for steel reinforcement protection in two coats (with brush or paint-brush).
Step 2: 1-2kg Revinex® / 25kg repairing mortar Neorep® for surface levelling (with addition of water into the mix).
Purposes: Protection of steel against corrosion and repair of damaged concrete structures.
Slurry – Bonding old to new concrete (cement, sand, Revinex®).
Proportion (by volume): 1 part cement: 1 part sand (particle size 0-2 mm): 0,5 – 1 part Revinex®.
Proportion: 5-10kg Revinex®/ cement bag 50kg.
Purposes: Floors with increased mechanical and chemical properties such as industrial and similar ones in repair workshops, garage, foodstuff units, laboratories.
Primer (cement, sand, Revinex®, water).
Proportion: 7-10kg Revinex®/ cement bag 50kg.
Purposes: Increased adhesion of renderings or mortars onto substrate.
Reinforcement of tile adhesives (Tile adhesive, Revinex®, water).
Proportion: 1-2kg Revinex®/ tile adhesive 25kg.
Purposes: Enhancement of adhesion, water impermeability, elasticity in sensitive wet areas where tiles are applied (e.g. swimming pools, bathrooms, kitchens).
Primer for coatings. Proportion: 1kg Revinex® diluted with 3-4 kg water. Enhances the adhesion of building paints, elastomeric coatings (e.g. Neoroof®) and cementitious waterproofing systems. For potential other uses of Revinex®, as improving agent of water-borne indoor or exterior paints, please consult NEOTEX® technical department.
Available in 1kg, 5kg and 18kg, light blue, sealed, tin containers and 200kg drums, marked with the lot/quality control number.
The product is stable for 18 months when kept unopened in its original container at temperatures between +5 °C and +35 °C, protected from frost and direct sunlight.