Procedure
Instructions for use
Surface preparation
The surface must be dry (humidity limit=5%). In concrete surfaces when the moisture of the substrate is up to 8%, if there is not rising moisture and the substrate temperature is > +12°C the surface should be primed with water-based primer Acqua® Primer. (All epoxy primers can be used e.g. Epoxol® Primer, Neopox® Primer 1225, Neopox® Primer WS, Neopox® Primer AY depending on the needs and the substrate).
Application
Apply 1 coating of Νeopox® CR with brush, roller or airless gun. If the 2nd layer will be applied after 24 hours, lightly scrub the surface to roughen it
Notes
Νeopox® CR cannot be applied below +12οC
Colour: Black
Cleaning of tools
Immediately after application with solvent Neοtex® 1021.
Stain removal
While still wet, with solvent Neοtex® 1021. If it has hardened, by mechanical means, in cases where it is possible, due to its great adhesion properties.
Download
Vietnamese
